System-config-printer
Материал из Mandriva Russian Community Wiki
System-config-printer — мощный инструмент, позволяющий производить настройку локальных и удалённых принтеров. System-config-printer можно запустить из центра управления Mandriva (раздел «Оборудование»). Пользователи редакции Mandriva One должны вручную установить пакет system-config-printer, поскольку по умолчанию эта программа в редакции One не установлена.
System-config-printer используется и сопровождается в рамках проекта Fedora. В Mandriva Linux, начиная с версии 2009.0, System-config-printer заменяет устаревшую программу Printerdrake.
Содержание |
Добавление нового принтера
Возможно, при первом запуске программы, система сообщит о необходимости установки дополнительных программ. Согласитесь на их установку..
Добавление локального принтера
1. Connect the printer to your system.
2. Choose Server + New → Printer from the menu or use the keyboard shortcut: Ctrl+N. If the printer was detected automatically, it's offered as the 1st option in the Select Device list (see the picture below), otherwise you can select the port and driver manually: make sure you have all needed data at hand.
3. Select the printer driver. If the printer was autodetected (as is the case with USB printers), just accept the suggested settings and click Forward. You can also provide your own PPD file or search for a suitable driver on the Internet. If there is more than one driver available for your printer, you are asked to choose which one to use: it is advisable that you keep the recommended one.
4. Provide descriptions for the printer. These serve to better identify printers if you happen to have more than one configured (see the picture below). Fill the Printer Name, Description, and Location fields as you see fit.
5. Click on Apply, the printer is then listed and marked as ready and available.
Добавление удалённого принтера
- Узнайте у своего системного или сетевого администритора модель и имя принтера, а также используемый им протокол. Убедитесь, что принтер включён.
- Используйте клавиатурное сочетание клавиш: Ctrl+N или выберите Server + New → Printer и выберите протокол из списка
1. Ask your system or network administrator for the model and name of the printer and the protocol it uses. Make sure the printer is switched on. 2. Use the keyboard shortcut: Ctrl+N or choose Server + New → Printer from the menu and choose the communications protocol in the Select Device list using the information provided by your system or network administrator. The example shows a printer served by a Windows system.
3. The rest of the steps are the same as described for the Local Printer configuration: choose the driver, fill in the descriptions, and click Apply to make the remote printer available to print on your system.
Изменение настроек принтера
Double click on a printer to access its properties. Open the section you are interested in, make your selections and click Apply to make your settings effective immediately.
Основные настройки
Here you can also change the printer descriptions and driver. It also provides buttons to print test pages and clean print heads (if applicable).
Политики
Allows you to change whether the printer is enabled, if it's accepting jobs, if it's shareable, what to do when printing errors occur, etc.
Управление доступом
By default, all users can print on the system printers, if you want to limit the users that can or cannot print on your system, fill the field and click the Add button to add user names to the Users list and then choose the following:
- Allow printing for everyone except these users to deny printing to the listed users
- Deny printing for everyone except these users to allow printing only to the listed users.
The example shows that only users peter and queen can print.
Параметры принтера
Allows you to change the default paper size, printout mode and quality settings.
Параметры задания
Allows you to change various print job parameters, such as the number of copies, scaling, orientation, etc.
